3Com 5124M-TPCL manual Unpacking Procedures, Setting the DIP Switches

Unpacking Procedures

When unpacking your 24-Port Module:

1.Verify that the 24-Port Module is the model you ordered by checking the model number listed on the side of the shipping carton (Model Number 5124M-TPCL or Model Number 5124M-TP).

Note that the product model number printed on the shipping box differs from the model number on the product. The model number on the shipping box contains the prefix ’3C9’.

2.Remove the module from the shipping carton.

3.Remove the module from the antistatic shielding bag and inspect it for damage. If the module appears to be damaged, replace it in the antistatic shielding bag, return it to the shipping carton, and contact your local supplier.

4.Keep the shipping carton and antistatic shielding bag in which your module was shipped for repackaging the module for storage or shipment.

5.Record the serial number of your 24-Port Module. A log for this and other information specific to your modules is included in the ONline System Concentrator Installation and Operation Guide, Appendix B, Slot Usage Chart.

Setting the DIP Switches

This section describes:

❑DIP Switch Overview

❑DIP Switch Description

3 - 4 ONline Ethernet 24-Port 10BASE-T Module Installation Guide