The channel select switch settings (switches 1 and 2 for connector 1, and switches 5 and 6 for connector 2) let you select a channel for each connector. To reconfigure the module to a different channel, refer to the information in Table
Table 3-3. Channel (Network) Select DIP Switch Settings
DIP Switch | DIP Switch |
| ||
Setting (CONN 1) | Setting (CONN 2) |
| ||
|
|
|
|
|
Switch 1 | Switch 2 | Switch 5 | Switch 6 | Network Selection |
|
|
|
|
|
On | On | On | On | 1 (default) |
|
|
|
|
|
Off | On | Off | On | 2 |
|
|
|
|
|
On | Off | On | Off | 3 |
|
|
|
|
|
Off | Off | Off | Off | Isolated (connector |
|
|
|
| operates independent |
|
|
|
| of the three backplane |
|
|
|
| networks) |
|
|
|
|
|
Installing and Operating the Module 3 - 9
