Securing 90° Cables to the Module
To secure 90° cables to the 24-Port Module connectors:
1.Remove the small cable-fastening screws from the shipping carton.
2.Remove the long screws (if present) from the 50-pin cables.
3.Attach a 50-pin cable connector to one of the 50-pin connectors on the front of the module (see Figure 3-5).
Figure 3-5. Attaching Cables With 90° Connectors (Model Number 5124M-TPCL)
Note: Due to the proximity of the top and bottom 50-pin connectors, you must install a standoff if you intend to use
aright-angle connector on the top connection. Contact your 3Com representative if you need more information.
Installing and Operating the Module 3 - 15
