OPERATION

Gearbox Noisy

Low Lubricant.

 

Rough gears.

 

Worn Bearing.

Gearbox Leaking

Damaged Oil Seal.

 

Bent Shaft.

 

Oil Seal Race rough.

 

Oil Seal installed wrong.

 

Oil Seal not sealing in the housing.

 

Oil level too high.

 

Gasket damaged.

 

Bolts loose.

 

Sand hole in casting.

Streaking Conditions

Conditions too wet for cutting.

 

Blades unable to cut that part of

 

grass pressed down by path of

 

tractor tires.

 

Dull blades.

 

Height of cutter lower at rear or

 

front.

Gearbox Overheating

Low on lubricant.

 

Improper type lubricant.

 

Excessive trash build-up around

 

gearbox.

 

Bearing or gears set up improperly.

Shear Pin Shears

Tractor PTO not being run at

Excessively

540 RPM.

 

Heavy Material.

 

Not using proper pin.

 

PTO engaged at high engine RPM

 

Cutting in rocky conditions

 

Blade carrier RPM too high.

 

Blades not properly heat treated.

Check lubricant level.

Run in or change Gears.

Replace Bearing.

Replace Seal.

Replace Oil Seal and Shaft. Replace Shaft or repair Race. Replace Seal.

Replace Seal or use a sealant on O.D. of Seal.

Drain oil to proper level. Replace Gasket. Tighten Bolts.

Replace castings or gearbox.

Allow grass to dry before cutting. Slow ground speed of tractor but keep engine running at full PTO rpm. Lowering the cutting height may help. Sharpen or replace blades.

See Cutting Height Instructions.

Fill to level plug.

Replace with proper lubricant. Remove trash.

Consult your Dealer.

Run at 540 RPM.

Reduce ground speed. Raise cutting height.

Replace only with recommended shear pin.

Idle engine to engage PTO Increase cutting height. Check gearbox ratios. Consult your Dealer.

OPERATION

SE8A 01/11

Operation Section 4-47

© 2011 Alamo Group Inc.

Page 155
Image 155
Rhino Mounts manual SE8A 01/11 Operation Section

SE8A specifications

The Rhino Mounts SE8A is a robust and versatile mounting solution designed for a variety of applications in both professional and casual settings. Known for its innovative design and durability, the SE8A caters to a wide range of users, including filmmakers, content creators, and industrial professionals.

One of the standout features of the SE8A is its compatibility with a variety of equipment, such as cameras, monitors, and other accessories. It supports standard 1/4-20 and 3/8-16 threads, making it easy to mount multiple devices simultaneously or switch between them without hassle. This versatility is crucial for users looking to efficiently leverage their gear in various settings, whether shooting on location or stabilizing devices in a controlled environment.

The design of the SE8A incorporates lightweight yet sturdy materials, allowing for easy transport while ensuring reliability and stability during use. The mount itself has been engineered to handle significant weight without compromising structural integrity, ensuring that equipment remains secure, even under demanding conditions. This robustness is particularly beneficial for outdoor shoots where environmental factors can influence equipment performance.

Another notable technological feature of the SE8A is its adjustable arm mechanism. Users can easily customize the positioning of their devices to achieve the perfect angle for shooting or monitoring. This adaptability allows for creativity during filming and ensures optimal visibility for monitoring purposes. The smooth adjustability reduces the time spent on setups and enables users to focus more on their creative processes.

Additionally, the Rhino Mounts SE8A includes anti-slip rubber grips to prevent any unwanted movement when mounted. This feature is essential for maintaining the desired configuration, ensuring stable shots without the risk of drifting. Users can have confidence in the mounting stability even during dynamic shooting scenarios.

Moreover, the SE8A is designed for quick installation and disassembly. The intuitive locking mechanism allows users to swiftly secure their devices in place or detach them when necessary, making transitions seamless and user-friendly. This ease of use is especially beneficial for professionals who are often on the move and need a reliable solution that won’t consume valuable time.

In conclusion, the Rhino Mounts SE8A is an exceptional mounting solution that combines durability, versatility, and practicality. With features like compatibility, lightweight design, adjustable arms, and anti-slip technology, it is sure to enhance the efficiency and creativity of any user’s workflow, making it a valuable tool for anyone in need of reliable equipment mounting.