Rhino Mounts SE8A manual Tongue, Axle Assembly, Control Rods

ASSEMBLY

ASSEMBLY

The Components of these machines are quite heavy. Block all components up securely before working under or putting extremities under such parts.

TONGUE

Insert 1-1/8" OD bushing(2) in tongue lug holes. Align bushings between the upright lugs on front of Main Frame. Use 7/8" x 2-1/2" bolts (1), flatwasher (3), and locknut (4) to secure. FIGURE Asm-R-0107

AXLE ASSEMBLY

Attach the Rear Axle to the lugs on the rear of the Main Frame using 3/4" x 2" bolts (1), bushings 1" OD x 3/4" (3), flatwashers (2), and locknuts (4). FIGURE Asm-R-0108.

CONTROL RODS

Attach level-lift control rod (1) to lug on the rear axle tube (Figure 5), and level-lift control rod (4) to lug on tongue (Figure 6) using pin (7), washer (5), and cotter pin (6).

Note: The adjusting nut (3) on control rods should be to rear of machine and secured with jamnut (2).

FIGURE Asm-R-0109 & Asm-R-0110.

SE8A 01/11 Assembly Section 3-4

© 2011 Alamo Group Inc.