Precor S3-19 manual Press Arm Assembly

S3.19 Assembly and Maintenance Guide

B.Slide the Handlebars in place on the Press Arm. Handlebars curve inward. Review the illustration for correct handlebar placement. Pull the T-handle up and adjust the handlebars into a secure position.

C.Attach the Row Handles using eight ¼ x ½-inch buttonhead screws eight radius washers

Note: Make sure the radius washers lie flat against the Row Handle before wrench tightening.

D.Wrench tighten the screws using the 5mm hex keys.

		Press Arm Assembly
B
Handlebars
				8	- ¼ x ½" buttonhead screws
				C 8	- radius washers
			Row Handles
1	2	3	4	5	6

Step 5. Assemble Press Arm, continued

page 17