Precor S3-19 manual Incline Back Bracket Pad Seat Pad

S3.19 Assembly and Maintenance Guide

G.Attach the Seat Pad to the Seat Stem using four 1-inch zinc buttonhead bolts

two zinc flat washers

Wrench tighten using a 6mm hex key.

H.Insert the Seat Stem into the Seat Upright Assembly. Pull out the seat adjustment T-handle to insert the stem. Place the Seat Stem at its lowest position.

J.To allow clearance for the Back Pad fasteners, pull the T-handle and adjust the Incline Bracket away from the Main Upright.

K.Attach the Back Pad to the Incline Bracket using three 1-inch zinc hex head bolts

three zinc flat washers Wrench tighten.

L.Return the Back Pad to a vertical position.

3 - 1" zinc bolts K 3 - zinc washers

Incline	Back
Bracket
	Pad

J

Seat Pad

4 - 1" zinc

G buttonhead bolts 2 - zinc washers

Seat Stem

Pull out the seat adjustment T-handle H to insert stem.

1 2

3

4

5

6

Step 3. Install Rollers and Seat Pads, continued

page 13