Precor S3-19 manual Install Leg Press Option Cable Connection

S3.19 Assembly and Maintenance Guide

9.Install Leg Press Option Cable Connection

A.Disassemble the 3½-inch pulley attached to the base frame bracket and feed the threaded end of the Leg Press Option Cable 130211 under the pulley. Reattach the pulley to its bracket using one 2-inch hex head bolt

two flat washers one locknut Wrench tighten.

B.Attach the threaded end of the cable to the Single Floating Pulley. Continue turning the screw three to four full turns to secure it inside the floating pulley housing. Rest the Single Floating Pulley on the floor.

1	- 2" bolt	A		B
2	- washers
1 - locknut
			Leg Press Option
			Cable 130211
1	2	3	4	5	6

Step 9. Install Leg Press Option Cable Connection

page 22