Precor S3-19 manual Assemble Press Arm

S3.19 Assembly and Maintenance Guide

5. Assemble Press Arm

Important: Obtain adult assistance to attach the Press Arm Assembly.

A.Attach the Press Arm Assembly, with the label facing out, to the Top Beam using

one ¾-inch x 5¼-inch threaded shaft two 1-inch zinc buttonhead bolts two zinc flat washers

Wrench tighten.

Note: Make sure the Press Arm rotates freely. If resistance exists, loosen the fasteners a ¹⁄₄ turn.

1	- ¾" threaded shaft		A
2	- 1" zinc buttonhead bolts
2	- zinc washers
	Top Beam
					Label on Press Arm Assembly
					Press Arm
					Assembly
	1	2	3	4	5	6

Step 5. Assemble Press Arm

page 16