Ricoh Using the Built-inFlash

	Using the Built-in Flash		Y
1 Press Cin standby mode.
2 Select a flash mode.
		Auto Flash Discharge

3 To compensate the flash output or when Kis selected, press Band then use Vto adjust the value.

Press Mto reset to the default setting.

Auto Flash Discharge

+1.0

Cancel 0.0 OK

3

Shooting

46

				0.0
			Cancel		OK
A	Auto Flash	Automatically measures the ambient light and
	Discharge	determines whether to use the flash.
	Auto Flash	Discharges a pre-flash for red-eye reduction
B +Red-eye
		before an automatic flash.
	Reduction
C	Flash On	Discharges a flash for each picture.
	Flash On	Discharges a pre-flash for red-eye reduction
D +Red-eye		before the main flash and discharges a flash
	Reduction	for each picture.
	Slow-speed	Sets to a slow shutter speed.
E		Use this, for example, when shooting a portrait
	Sync	with the sunset in the background.
	Slow-speed	Discharges a pre-flash for red-eye reduction
F Sync+Red-		before the main flash is discharged with Slow-
	eye	speed Sync.
	Trailing	Discharges a flash immediately before closing
H		the shutter.
G	Curtain	Sets to a slow shutter speed.
	Sync	Captures moving objects as if they are leaving
		a light trail behind them.
	Manual	Sets the amount of flash discharge between
K Flash
		FULL and 1/128 power.
	Discharge

4 Press E.

The camera returns to standby mode.

5 Press 1.

The built-in flash is popped up.

tMemo

•The flash modes that can be selected vary depending on the capture mode.

Capture Mode Selectable Flash Mode

R, S*1A, B, C, D

W, G, H, J C, D, E, F, H, K

I, K, L, M C, D, G, K

*1 The flash is not available in some scene modes. (p.82)

•You cannot take pictures while the flash is being charged. If you want to take pictures while charging the flash, set [20 Release While Charging] in the E3 menu.

•Depending on the lens being used, the use of the built-in flash may be limited. (p.85)