AF Fine Adjustment

E4

You can precisely fine tune your lenses with the camera’s autofocus system.

1 Select [25 AF Fine Adjustment] in E4 menu and press D.

The [25 AF Fine Adjustment] screen appears.

2 Select [Apply All] or [Apply One] and press E.

Apply All Applies the same adjustment value to all lenses.

Saves an adjustment value for the lens being Apply One used. (Up to 20 values)

 

 

Setting the Drive Mode

 

Z

 

 

 

 

 

You can choose from the following drive modes.

 

 

 

 

Single Frame Shooting

Normal capture mode

 

(L)

 

 

 

Continuous Shooting

Continuously takes pictures while

 

0is kept pressed.

 

(Z/b)

The framerate varies according to

 

 

 

the shutter speed.

 

Self-timer

Releases the shutter about 12

 

seconds or 2 seconds after 0

(O/P)

is pressed.

 

 

 

 

 

 

 

 

 

 

 

 

Enables shooting with remote control.

3

Shooting

3 Select [Setting] and adjust the value.

25 AF Fine Adjustment

3 Apply One

 

 

 

Setting

 

±0

 

Reset Individual Settings

 

 

 

 

 

 

Cancel

±0

OK

Remote Control

Select from [Remote Control] or

(Q/R)

[Remote Control (3 sec. delay)].

 

 

Exposure Bracketing Takes three consecutive images at

(T)

different exposure levels.

uCaution

• There are restrictions on some drive modes when used in some

Available operations

D/Vto the right

Adjusts the focus to a closer position.

 

 

C/Vto the left

Adjusts the focus to a farther position.

MResets the adjustment value to the default setting.

4 Press E.

The adjustment value is saved.

5 Press Ftwice.

The camera returns to standby mode.

capture modes or in combination with some other functions. (p.82)

tMemo

•Only 4(Remote Control Off) or Qcan be selected in Cmode.

•The Drive Mode setting is saved even after the power is turned off. If [Drive Mode] is set to [Off] in [Memory] of the A4 menu, the setting returns to Single Frame Shooting when the power is turned off. (p.76)

•The Shake Reduction function is automatically turned off when Self-timer or Remote Control is selected.

•When the drive mode that employs the self-timer or remote control is selected, exposure may be affected by the light entering through the viewfinder. In such a case, use the AE Lock function. (p.42)

51