Ricoh manual 94

6

Appendix

92

Error Messages		Description
Not enough battery power
remaining to activate Pixel	These messages appear when you try to
Mapping
	perform Pixel Mapping or Sensor
Not enough battery power
	Cleaning, or to update the firmware if the
remaining to clean sensor
	battery level is insufficient. Install a fully
Not enough battery power
	charged battery.
remaining to update the
firmware
Unable to update firmware.	Unable to update the firmware. The
There is a problem with the	update file is damaged. Try downloading
firmware update file	the update file again.
	The maximum folder number (999) is
Image folder cannot be	being used, and no more images can be
created	saved. Insert a new memory card or
	format the card.
Unable to store image	The image could not be saved because of
	a memory card error.
	The camera was unable to adjust the
	manual white balance. Try the operation
The operation could not be	again.
	Failed to authenticate the wireless
completed correctly
	function when using the Flucard. Or,
	[Reset Transfer Settings] failed when
	using an Eye-Fi card or Flucard.
	You are trying to select more than the
	maximum number of images for the
No more images can be	following functions.
	•	Select & Delete
selected
	• RAW Development
	•	Protect
	•	Eye-Fi Image Transfer
	There are no images that can be
No image can be processed	processed using the Digital Filter or RAW
	Development function.

Error Messages	Description
	Appears when you try to perform Resize,
	Cropping, Digital Filter, Movie Edit, RAW
This image cannot be	Development, or Save as Manual WB for
processed	images captured with other cameras, or
	when you try to perform Resize or
	Cropping for minimum file size images.
This function is not available	You are trying to set a function that is not
in the current mode	available for the capture mode that is set.
	The camera will turn off because its
The camera will turn off to	internal temperature is too high. Leave
prevent damage from	the camera turned off until it has had time
overheating	to cool down before turning on the
	camera again.
	Images cannot be transferred when
Set the Eye-Fi	[Action Mode] is not set to [SELECT] in
communication to “SELECT”	[Wireless Memory Card] of the D3 menu.
	(p.81)
Image not found	There are no images that can be
	transferred when an Eye-Fi card is used.
No wireless memory card	You are trying to perform [Eye-Fi Image
inserted	Transfer] with no Eye-Fi card inserted.
	This folder cannot be selected because
Cannot be selected	the number of files stored in this folder
	exceeds the maximum number allowed.