4

Playback

66

Connecting the Camera to a Computer

Connect the camera to a computer using an USB cable. Make sure to have a commercially available USB cable equipped with a micro B terminal.

1 Turn the computer on.

2 Turn the camera off.

3 Open the terminal cover of the camera, and connect the USB cable to the USB terminal.

4 Connect the USB cable to the USB port of the computer.

5 Turn the camera on.

The camera is recognized as a removable disk.

The grip lamps of the camera blink slowly while the camera is connected with the computer via USB cable.

6 Save the captured images to the computer.

7 Disconnect the camera from the computer.

uCaution

•The camera cannot be operated while it is connected to a computer. To operate the camera, terminate the USB connection on the computer, then turn off the camera and remove the USB cable.

•If the “PENTAX K-S1” dialog appears on the computer screen in Step 5, select [Open folder to view files] and click the OK button.

tMemo

•Refer to “Operating Environment for USB Connection and Provided Software” (p.98) for system requirements to connect the camera to a computer and to use the software.

•The USB connection mode when connecting the camera to a computer can be set in [USB Connection] of the D2 menu. Normally, you do not need to change the default setting ([MSC]).