Introduction
1 - 11
1

How to load paper

To load paper or other media in the

paper tray

1Pull the paper tray completely out of the
machine.
2While pressing the paper guide release
lever, slide the adjusters to fit the paper
size.
Check that the guides are firmly in the
slots.
3Fan the stack of paper well to avoid
paper jams and mis-feeds.
4Put paper in the paper tray.
5Put the paper tray firmly back in the
machine. Lift the ADF document output
support and unfold the output paper tray
support flap before you use the
machine.
Note
When you put paper in the paper tray, please
remember the following:
Check that the paper is flat in the tray and
below the maximum paper mark, and that
the paper guides are touching the sides of
the paper stack.
The side to be printed on must be face
down.
Maximum Paper Mark
Output Paper Tray
Support Flap