1.Insert each AC adapter’s barrel plug into DC 9V on the top of each intercom.
2.Plug the other end of the adapters into a standard AC outlet.
Complete charging takes about 10 to 12 hours. Average charging time varies, depending on capacity. Typically, Ni- MH (1500 mA/H) batteries charge in about 12 hours.
When charging is complete, unplug the AC adapter from the power source, then disconnect it from DC 9V. #"
75+0)"6*'"+06'4%1/N5"%*#00'.5"#0&" 57$/610'5
The intercoms use radio frequencies called channels to communicate with each other. Your intercoms have four channels. The intercoms also use
The channels and
•communicate with each other
•communicate with additional intercoms you purchase.
•not communicate with other intercoms
For example, if you have more than two intercoms installed in your home, you can set them so the intercom you installed at the front door communicates only with the intercom you installed in the kitchen (so guests at the door can announce themselves to somebody working in the kitchen).
You must set any two intercoms to the same channel and
5GVVKPI"VJG"%JCPPGN"CPF"5WD/6QPG
Each intercom has a group of DIP switches inside the battery compartment. Use an object such as a straightened paper clip to set the DIP switches.
1.On each intercom, slide the battery compartment cover on the back of the intercom in the direction of the arrow to remove it.
#"+/2146#06"#
Important: The EPA certified RBRC®Battery Recycling Seal on the
Preparation
3