Product Support Guide
D014 / D015
Installation
Installation Requirements
Temperature Range: | 10° C to 32° C (50° F to 89.6° F) |
Humidity Range: | 15% to 80% RH |
Ambient Illumination: | Less than 1,500 lux (do not expose to direct sunlight) |
Ventilation: | 3 times/hr/person |
Ambient Dust: | Less than 0.10 mg/m3 |
Avoid areas exposed to sudden temperature changes:
•Areas directly exposed to cool air from an air conditioner.
•Areas directly exposed to heat from a heater.
Do not place machine where it will be exposed to corrosive gas or vapor.
Do not install the machine at any location over 2,000m (6,500 ft.) above sea level.
Place the machine on a strong and level base. Inclination on any side should be no more than 5mm (0.2”)
Do not place the machine where it may be subject to strong vibrations.
Machine level
•Front to back: within 5mm (0.2”) of level
•Right to left: within 5mm (0.2”) of level
Power Requirements
Line voltage level:
D014: 120V 60 Hz 20AD015: 208 to 240V 50~60 Hz 20A
Permissible voltage fluctuation:
Never set anything on the power cord.
D014 (MP C6000) Only | D015 (MP C7500) Only |
Ver.1.9 | Page 13 of 38 | 1/16/2009 |
Subject to change without notice
