Ricoh GF-1 instruction manual Turning off the flash, Power saving mode

Turning off the flash

1Keep the ON/OFF button pressed for about 2 seconds to turn off the flash.

Power saving mode

To save battery power, the flash unit will automatically enter stand-by mode about 2 minutes after the camera's Auto Power Off is activated. In stand-by mode, the PILOT lamp blinks in red every 2 seconds.

If you operate any of the buttons on the flash unit, or if the camera is turned on, the flash will automatically wake up from stand-by mode.

If the flash unit is left in stand-by mode for 30 minutes, the Auto Power Off function will be activated and the flash will be turned off completely. To use the flash in such case, turn on the power of the flash unit again.

*In slave mode the flash unit will not enter stand-by mode and the Auto Power Off function will be activated only after 60 minutes.

EN -