Mounting the flash on a camera
1Turn the lock ring as shown
in the illustration to loosen it.
2 Insert the flash unit into the hot shoe on the camera. Securely insert the flash unit all the way into the hot shoe.
3Turn the lock ring as shown
in the illustration to fix the flash unit to the camera.
Removing the flash from a camera
1Loosen the lock ring completely before removing the flash unit.
Turning on the flash
1Press the ON/OFF button
to turn on the flash. When the power is turned on, the PILOT lamp lights up in red and the flash starts to charge.
2After a few seconds, when
the PILOT lamp turns green, the flash is completely charged and ready to be used.
