Ricoh GX8 manual Getting the SD Memory Card Ready for Use, Card Format

Turn the Mode Dial to 1.

Getting the SD Memory Card Ready for Use

(CARD FORMAT)

If the error message “This card cannot be used” is displayed, or if you have formatted a card with a computer or some other device, it will be necessary to format the SD Memory Card prior to use. Formatting is the process of preparing a card so image data can be written on it.

Caution

If you format a card that still has images stored on it, the images will be lost.

Reference

For how to format internal memory, see P.112.

To format a card, follow the steps below.

1.

2. Press the " button to select [CARD FORMAT] and press the Oor $ button.

A screen appears to confirm formatting.

3. Press the #$ button to select [YES] and then press the O button.

Formatting starts. When it is done, the display returns to the SETUP menu.

If no SD Memory Card is inserted, a message will be displayed. After turning the power off, load an SD Memory Card and repeat the formatting process again.

Note

Protecting your images from being deleted

If you move the card's write-protection switch to LOCK, your still images cannot be accidentally erased and the card cannot be formatted.

If you release the protection (by returning the switch to its original position), it is once again possible to erase images and format the card.

Changing Camera Settings

111