Ricoh GX8 Installing the Software on Your Computer, Click Install Caplio Software, Click Next

Installing the Software on Your Computer

Caution

•Do not connect your camera to the computer until indicated. If you happened to connect your camera to the computer (resulting in the [Add New Hardware Wizard] screen appearing), simply click [Cancel], and after disconnecting your camera, install the software on your computer.

•If a message is displayed during installation to uninstall the old Caplio software before installing the new one, uninstall the old Caplio software once and install the new one again by following the message instructions. Even with the new Caplio software, however, the image downloading and other functions of the old model can still be used as before.

•If you have already installed DU-10 or Caplio Viewer for other model of Caplio camera, it is also available with the new camera.

•For Windows XP or Windows 2000, Administrator privileges are required to install the software.

Note

Here is an example of the Windows XP screen.

1. Start your computer and insert the Caplio CD-ROM in the CD-ROM drive.

The screen shown on the right appears automatically.

2. Click [Install Caplio Software].

After a while, the [Select Setting

Language] screen appears.

3. Confirm the language, and then click [OK].

After a few moments, the [Welcome to InstallShield Wizard] screen appears.

4. Click [Next].

After a few moments, the [Select

Installation Destination] screen appears.

134