Ricoh GX8 manual Changing File Name Settings Sequential no

Turn the Mode Dial to 1.

Changing File Name Settings (SEQUENTIAL NO.)

When you shoot a still image, it is stored on an SD Memory Card or in internal memory, with a consecutively numbered file name automatically assigned. When you are switching SD Memory Cards, you can set your camera to continue consecutive numbering from the previously loaded SD Memory Card.

Possible Settings
ON (Continue numbering)	File names will be automatically assigned to still images you take, in the format of
	“R” followed by 7 digits, from R0010001.jpg to R9999999.jpg.
	With this setting, even when one SD Memory Card is switched with another,
	consecutive file numbering from the previous card is continued.
OFF (Do not continue	Every time a new card is loaded, file numbering is assigned, from RIMG0001.jpg
numbering)	to RIMG9999.jpg.
*Initial setting at purchase	If numbering exceeds RIMG9999, further recording is not possible

To make changes to file numbering, follow the steps below.

1.

2. Press the " button to select [SEQUENTIAL NO.].

3. Press the #$buttons to select the desired setting.

This setting will be used until you change it.

Note

•When you are recording to internal memory, file names are assigned just as when [SEQUENTIAL NO.] is set to [OFF].

•When transferring images to a computer, if a file already exists with the same name in the destination folder, your image is renamed before saving to avoid overwrite problem.

•When transferring images to a computer via the provided USB cable, the files are assigned names like RIMG****.jpg (**** indicates the number of the image), even if [SEQUENTIAL NO] is set to ON.

•If RIMG9999 is exceeded, since a file number becomes insufficient, it is impossible to record more. In this case, please move the files in SD memory card to a personal computer and format it.

118