Ricoh GX8 manual Setting a Function to the ADJ. Button ADJ BTN.SET, Possible Settings Refer to

Turn the Mode Dial to 1.

Setting a Function to the ADJ. Button (ADJ BTN.SET.)

Each time the ADJ. button is pressed, the camera displays the setting screen in the order of exposure, white balance, and ISO sensitivity.

By using the [ADJ BTN.SET.] option, you can set a function to be activated when the ADJ. button is pressed the fourth time.

Possible Settings	(Refer to)
OFF *Initial setting at purchase
QUALITY (PIC/QUALITY)	P.62
AF/MF (FOCUS)	P.64
SHARP (SHARPNESS)	P.68
PHOTOMETRY	P.67

To assign a function to the ADJ. button, follow the steps below.

1.

2. Press the " button to select [ADJ BTN.SET.].

3. Press the #$buttons to select the desired setting.

This setting will be used until you change it.

Note

If a function is set with [ADJ BTN.SET], the AF target shift function (P.85) available from the ADJ. button at Macro shooting is activated when the ADJ. button is pressed the fifth time.

Reference

For how to use the ADJ. button, see P.59.

114