Accessing User Tools (System Settings)

Accessing User Tools (System Settings)

This section is for key operators in charge of this machine.

User Tools allow you to change or set defaults.

Note

Operations for system settings dif- fer from normal operations. Al- ways quit User Tools when you have finished. See p.24 “Quitting User Tools”.

Any changes you make with User Tools remain in effect even if the

main power switch or operation switch is turned off, or the {Clear Modes}key is pressed.

B Select [System Settings] using {U} or {T}, and then press the {OK} key.

3

C Select the menu using {U}or {T}, and then press the {OK}key.

Changing Default Settings

Note

If a key operator code is already set, the key operator code entry display appears. Enter the key op-

erator code, and then press the {OK} key. See p.30 “Key Operator Code”.

A Press the {User Tools/Counter}key.

 

User Tools/Counter

ClearModes

ABC

DEF

Clear/Stop

 

 

JKLMNO

Start

TUVWXYZ

APE044S

Reference

p.21 “User Tools Menu (System Settings)”.

D Select the item using {U} or {T}, and then press the {OK}key.

E Change settings by following instructions on the display, and then press the {OK}key.

Note

To cancel changes made to set-

tings and return to the initial dis- play, press the {User Tools/Counter} key.

23