User Tools (System Settings)

Key Operator Tools

The key operator must set the following items. For settings or more information, contact the key operator.

It is recommended that the key operator program a key operator code when performing the settings. See p.30 “Key Operator Code”.

User Code Man.: Copier

Allows you to control who uses the machine by setting codes for users. User codes must be registered for user code management.

3

Note

Default: Off

By using [Auto Program] for the printer, you can keep a print log for each user code entered from the driver.

Key Counter Management

Use the key counter to specify whether users are restricted or not.

Note

Default: Off

[Key Counter Management] will only be displayed when the key counter is set.

Key Operator Code

Specify whether or not to use passwords (max. eight digits) to control Key Operator Tools settings for key operator code.

Note

Default: Off

If you select [On], enter the key operator code (max. eight digits) using the number keys, and then select [On: Partial] or [On: All] to set the access limit.

If you selected [On: Partial]

A key operator code is only required for the Timer Settings and Key Op- erator Tools for System Settings. [Menu Protect] can be set for [Mainte- nance] in Printer Features. If you set [Menu Protect], you can set the key operator code for some Printer Features. See “Printer Features Parame- ters”, Printer/Scanner Reference.

If you selected [On: All]

A key operator code is required to access all items in System Settings, Copier Features, Printer Features, and Scanner Features.

If you select [On: All], you must enter a key operator code to access the Key Operator Code display.

30