Settings You Can Change with User Tools
❖Energy Saver Timer
The machine automatically enters Low Power mode automatically after a job is finished, and the selected time elapsed.
Note
❒Default: 1 min.
❒The time can be set from 1 to 240 minutes, using the number keys.
❒Energy Saver may not work when error messages appear.
❒The machine automatically prints any fax or printer data received while in Energy Saver mode.
❖ System Auto Reset Timer | 3 |
|
The System Reset setting automatically switches the screen to that of the function set in Function Priority when no operations are in progress, or when an interrupted job is cleared. This setting determines the system reset interval. See p.25 “Function Priority”.
Note
❒Default: On, 60 sec.
❒The time can be set from 10 to 999 seconds in 1 second increments, using the number keys.
❒When the set time has passed, the control panel returns to the menu that was displayed before the {User Tools/Counter}key was pressed.
❖Copier Auto Reset Timer
Specify the time to elapse before copier modes reset.
Note
❒If [Off] is selected, the machine does not automatically switch to the user code entry screen.
❒Default: On, 60 sec.
❒The time can be set from 10 to 999 seconds, using the number keys.
29