OPTIONAL FUNCTIONS
82
2
Basically, set originals as shown be-
low.
When you have an optional memory
board and the original is set in a dif-
ferent direction from the print paper,
the machine automatically rotates the
original image by 90° to match the
print paper direction.
You cannot set originals of different
sizes at the same time.
When you use thin originals, set one
original at a time in the document
feeder or set them on the exposure
glass (contact glass).
The first 10 mm, 0.4", of the leading
edge and the last 2 mm, 0.08" of the
trailing edge cannot be printed. Make
sure the leading edge margin is at
least 10 mm, 0.4", and the trailing
edge margin is at least 2 mm, 0.08".
Do not stack originals above the limit
mark.

Setting Originals In The

Document Feeder

AAdjust the guide to the original
size.
BSet the aligned originals face up
into the document feeder.
Limitation
Approximately 30 originals (80
g/m2, 21 lb) can be inserted at
one time in the document feed-
er. The first (top) original will be
fed first.
Note
To avoid a multi-sheet feed,
shuffle the originals before set-
ting them in the document feed-
er.
The guides must fit snugly
against both sides of the stack.
CAdjust any print settings as nec-
essary, then press the {
{{
{
Start
}
}}
} key.
R
R
GRSETT1E
TPEH350E
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES050N