Ricoh JP5000 F, G, H, I, K, O, L, N

Directional Magnification—Stretching And Squeezing The Image In 1 % Steps
39
1
CPress the [
OK
] key.
DSelect [
Direct. Mag. (size)
] with the
[→
→→
→] or {
{{
{}
}}
}}
}}
} key.
EPress the [
OK
] key.
FEnter the vertical original size
with the Number keys and press
the {
{{
{
Enter
}
}}
} key.
Note
❒To change the value entered,
press the {
Clear/Stop
} key and
enter the new value.
❒Up to 999 mm, 99.9" can be en-
tered.
GEnter the vertical print size with
the Number keys and press the
{
{{
{
Enter
}
}}
} key.
HEnter the horizontal original size
with the Number keys and press
the {
{{
{
Enter
}
}}
} key.
IEnter the horizontal print size
with the Number keys.
JPress the [
OK
] key.
The machine will select proper re-
production ratios for vertical and
horizontal directions.
KMake sure that the original and
the print paper are the correct
size.
LSet your original on the exposure
glass (contact glass) or in the op-
tional document feeder.
MPress the {
{{
{
Start
}
}}
} key.
NCheck the image position of the
trial or proof print.
Note
❒If the image position is not cor-
rect, adjust it using the [
Image
=] key (see ⇒ P.25 “Adjusting
Print Image Position”).
OMake your prints.
TPES570E
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES120N
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES050N