Ricoh JP5000 Auto CycleMaking Master And Prints At One Stroke

Auto Cycle—Making Master And Prints At One Stroke
49
1
Auto Cycle—Making Master And Prints At
One Stroke
Use the {
Auto Cycle
} key to process
masters and make prints at one
stroke.
Note
❒When you use the optional docu-
ment feeder, it is not necessary to
place originals one by one. All
originals are fed and prints are
completed after you press the
{
Start
} key.
ASet your original on the exposure
glass (contact glass) or in the op-
tional document feeder.
Note
❒You can set up to 30 originals
into the optional document
feeder.
BEnter the number of prints re-
quired with the Number keys.
CPress the {
{{
{
Start
}
}}
} key.
DCheck the image position of the
trial or proof print.
Note
❒If the image position is not cor-
rect, adjust it using the [
Image
=] key (see ⇒ P.25 “Adjusting
Print Image Position”).
EPress the {
{{
{
Auto Cycle
}
}}
} key.
Note
❒If you press the {
Auto Cycle
}
key, you cannot make proof
prints by pressing the {
Proof
}
key.
FPress the {
{{
{
Print
}
}}
} key.
Note
❒Repeat steps A through C until
all originals are printed when
you are setting originals on the
exposure glass (contact glass).
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES040N
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES050N
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES150N
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES070N