Operation
22
1
Energy Saver Mode
If you do not operate the machine for a certain period the machine can enter
Idling for pre-printing function to remove ink from inside the ink drum, and
then the machine can enter Energy Saver mode to save energy consumption.
You can press the {
{{
{Clear Modes/Energy Saver}
}}
} key to cancel Energy Saver mode
and return the machine to the ready condition.
Idling for pre-printing function helps to reduce excess ink when printing. It re-
duces recovery time from Energy Saver mode.
Energy Saver mode uses less electricity.
Note
❒If you press the {
{{
{Clear Modes/Energy Saver}
}}
} key for more than three seconds,
the machine will enter Idling for pre-printing function, and then it will enter
Energy Saver mode.
❒You can change the setting so that the machine does not enter Idling for pre-
printing function. See “Setting Q.start” on p.146 “4. Mode Setting”.
❒Idling for pre-printing function lasts for a few seconds.
❒You can change the time the machine waits before Energy Saver mode starts.
See “Energy Saving” on p.143 “1. System”.
❒The machine will not automatically enter Energy Saver mode in the following
cases:
•If there is no ink
•If originals or paper are jammed
•If the machine is making master or printing
•If the machine is printing the second page of a combined print job
•If the machine is loading original images in memory
•If there is no paper
•If there is no master
•If the paper delivery box is full
•If originals are left on the document feeder
•If there are originals still on the machine
•If the “cover open” message is displayed
•If the settings have been reset to their defaults
•If there are prints in the sorter's paper delivery tray
•If the User Code entry screen is displayed