Ricoh JP8000 Energy Saver Mode

Operation

22

1

Energy Saver Mode

If you do not operate the machine for a certain period the machine can enter

Quality Standby mode to remove ink from inside the ink drum. The machine can

then enter Energy Saver mode.

You can press the {Clear Modes/Energy Saver} key to cancel Energy Saver mode

and the machine returns to the ready condition.

If you press the {Clear Modes/Energy Saver} key for more than three seconds, the

machine will enter Quality Standby mode to remove ink from inside the ink

drum then it will enter Energy Saver mode.

Quality Standby mode helps to reduce excess ink when printing.

It reduces recovery time from Energy Saver mode.

Energy Saver mode uses less electricity.

See “Energy Saving” ⇒ P.137 “1. System”.

Note

❒You can change the setting so that the machine does not enter Quality Stand-

by mode. ⇒ P.22 “Energy Saver Mode”.

❒Quality Standby mode lasts for a few seconds.

❒You can change the time the machine waits before Energy Saver mode starts.

⇒ P.22 “Energy Saver Mode”.

❒The machine will not automatically enter Energy Saver mode in the following

cases:

•If there is no ink

•If the originals or paper are jammed

•If the machine is making master or printing

•If the machine is printing the second page of a combined print job

•If the machine is loading original images in memory

•If there is no paper

•If there is no master

•If the paper delivery box is full

•If there are originals still on the machine

•If the cover open message is displayed

•If the settings have been reset to their defaults

•If the User Code entry screen is displayed

Contents

Main JP8000 Operating Instructions RICOH COMPANY, LTD. Overseas Affiliates Page Page i Safety Information Safety During Operation R WARNING: ii R CAUTION: iii How to Read This Manual Symbols iv Making Prints A Placing originals on the exposure Inserting originals in the optional v What You Can do with this Machine Page Page Page x Storage Overlay R RR GROVER0E TABLE OF CONTENTS 1.Operation Page 2.Optional Functions 3.Combination Chart 4.User Tools 5.Troubleshooting 6.Remarks 7.Specifications Page Machine Exterior Machine Interior Page Options 1. Operation Panel Keys 1. 2. 3. 16. 17. 18. 19. 20. Indicators 1. 2. 3. 4. Panel Display 1. 2. 3. 4. Panel Display Layout Page 1. Operation Print Paper Page Page Page Printing Preparations Loading Paper A B C E Setting Up The Paper Delivery Tray A B When you use thick paper (128 g/ m2 to 209.3 g/m2, 34 lb to 55.6 lb) C D Entering a User Code to Use the Machine A C D Standard Printing A B C D I J K Removing Prints A B Energy Saver Mode Adjusting the Position of Printed Images A B 24 Adjusting the Image Density of Prints Before making a master After making a master Before Making a Master After Making a Master Tint Mode B Changing the Printing Speed Stopping a Multi-print Run Stopping a Multi-print Run to Print Another Original B C Changing the Number of Prints Entered and Checking Completed Prints B Reducing and Enlarging Using Preset Ratios B D E G H Auto Magnification *2 Set these originals in the optional document feeder. *1 The machine automatically rotates the original image by 90 to match the paper direction and selects an appropriate reproduction ratio. P.81 Image Rotation. Original A3LB4LA4LA4KB5LB5KA5L *2 A5K *2 A er. B C ] or { {} Page 33 Zoom D F Using the [ ] or {~} {}} H L I 35 Directional Magnification (%) D F Adjusting ratios with the [ ] or {~} {}} keys Page Directional Magnification (Size) D F G O H I Erasing Center and Edge Margins A E B 40 Edge Erase Using Edge Erase mode When not using Edge Erase mode B Printing onto Various Kinds of Paper Printing onto Thick Paper B Printing onto Standard Paper B D E Printing onto Special Kinds of B Page Selecting Original Modes Letter/Photo Mode Printing C B 45 D Photo Mode Printing B Adjusting the photo mode contrast D Pencil Mode Printing B Economy Mode E Auto Cycle B All Class Mode B D Page Auto Class Mode B D 53 Selecting classes with the {~}, {}}, {|}, or {{} key Selecting classes with the number keys F Manual Class Mode with One Original I L Manual Class Mode with 2 or More I L N Class Mode B D Page Combine Originals Page A B C E Page 66 Auto Combine Mode 1 single-sided original 1 single-sid- ed print of 2 images 1 single-sided originals 1 single- sided print of 4 images Page Skip Feed Printing C Page Programs Storing a Program A C E Protecting a Program Removing Program Protection E Recalling a Program B Security Mode A C 74 Quality Start Mode Manual Quality Start Auto Quality Start Using Quality Start Manually Job Separation B Conserving the Master 79 On Line Printing 8 " When printing onto A5K, 5 When a print job has not finished printing while in online mode Auto On Line Image Rotation Make-up Printing Features Main Features Make-up Modes for Designated Areas Make-up Printing Features Make-up Modes for Outside Designated Areas Background Patterns 86 Command Sheets for Make-Up Printing Command Sheets Making a Command Sheet -Features Page 88 -Notes 89 Diagonal line method B 90 Closed area method B Page Command Sheets and Finished Prints fruit Make-up Printing B C E G J K N L M O P Make-up Samples 97 -Sample 2 3. 4. 98 -Sample 3 Original Storage Storing Original B 100 D E Non-standard size originals 101 Selecting Stored Original B D Protecting Stored Original Protecting Original D D Deleting Stored Original B C D 104 Image Overlay Overlay Format On Line overlay Storage overlay E On Line overlay C Overlay.Format B D Placing originals on the exposure Placing originals in the optional Date Stamp 108 B D F G Placing your original (K) on the exposure glass Page Stamp B D 110 If you selected [P1,P2] or [-1-,-2-] F H I Stamp B D F 113 H J K Placing your original (K) on the exposure glass (contact glass) Placing your originals (K) in the Memory Combine Combining Several Singlesided Originals onto one Single sided Print 116 Limitation Placing originals in the optional document feeder (metric version) Placing originals in the optional document feeder (inch version) Original A3LB4LA4KL B5KL A5KL B Page Repeat Page D F G H 2. Optional Functions Optional Document Feeder Originals Placing Originals in the A B C Combine Printing with the A B E Manual Class Mode with Two or More Originals Using the I L Color Printing Using the Optional Color Drum Making Color Prints A C Changing the Color Drum Unit Page J Printing in Two Colors A B F G H I Changing the Drum Size Printing Area (At 23 C/73 F, 65% RH) Master Cut Length 3. Combination Chart Combination Chart This combination chart shows which modes can be used together. Page 135 4. User Tools Accessing the User Tools B Using the {~}, {}}, {|}, or {{} key Using the number keys C User Tools Menu For accessing the user tools, P.135 Accessing the User Tools. 1. System Page 2. Set Operat'n Mode 3. Initial Setting Page 4. Mode Setting Page Page Page 5. Stamp Page 148 6. Administrator Mode User Codes 7. On Line Mode User Tool Menus in Detail 1-6 Time Setting B C D D E F E 3-5 Class Enter No. C D F G 3-11 Margin Erase Area D 153 F If you selected A3 to A6 or 11" 17" to 51/2" 81/2" D If you selected p 4-11 No. of Skip Feed E 4-14 No. of Q.start C D F H 4-19 Type of Paper C D F condition with the [ ] or [ ] key. H D F G 5-7 Position (Date) 158 C -1- D F G C D F G 5-11 Make/Chg. Pattern D F 6-1 Check Counter C 161 E 6-2 Reset Counters C D If you selected [Single] C F 6-6 Del. User Code C Page Page 5. Troubleshooting If Your Machine does not Operate as You Want If a malfunction or a misfeed occurs, the following messages will appear on the panel display. Page If You Cannot Make Prints as You Want If You Cannot Make Prints as You Want Combine Originals Mode Loading Paper B C D x Clearing Misfeeds x + A Paper Misfeeds in the Paper Feed Section A x + A + B Paper Misfeeds in the Paper Feed Section B D 171 E x B x + B Paper or Master Wrapped around the Drum When the master is wrapped around the drum E Page D E x + C Paper Misfeeds in the Paper Exit Section A Page D E x + B + E Master Misfeed in the Master Eject Section B D Page B C x + P Original Misfeeds Occur When Using the Optional Document Feeder A B C D E F 178 -To prevent original misfeeds: Page When the Add Ink Indicator (j) Lights B Page When the Master End Indicator (C) Lights Page When the Master Eject Indicator (k) Lights A B C D E F When Other Indicators are Lit When Prints are not Delivered in a Neat Stack When Printing on Small Size A When the Machine Cannot Detect the Paper Size B Poor Printing Dirty Background A Page Page Black Lines/Stained Prints Faint Prints 6. Remarks Do's and Don'ts Page 193 Where to Put Your Machine Environment Optimum environmental conditions Environments to avoid 194 Power Connection Machine Clearance Main frame 195 Maintaining Your Machine Cleaning the machine Cleaning the Main Frame Cleaning the exposure glass A A B 7. Specifications Main Frame Page Page Page Document Feeder (Option) Twin Color Press Roller Printing System TC- II (Option) Consumables Consumables Specifications are subject to change without notice. 204 INDEX A B C D 205 E F H I 206 N O P Q 207 T U W Z Page Page Page Page Page i Safety Information Safety During Operation R WARNING: ii R CAUTION: iii How to Read This Manual Symbols iv Making Prints A Placing originals on the exposure Inserting originals in the optional Page What You Can do with this Machine Page Page Page x Memory Combine R RR GROVER0E TABLE OF CONTENTS 1.Operation Page 2.Optional Functions 3.Combination Chart 4.User Tools 5.Troubleshooting 6.Remarks 7.Specifications Page Machine Exterior Machine Interior Page Options 1. Operation Panel Keys 1. 2. 3. 16. 17. 18. 19. 20. Indicators 1. 2. 3. 4. Panel Display 1. 2. 3. 4. Panel Display Layout Page 1. Operation Print Paper Page Page Page Printing Preparations 16 E When you use thick paper (128 g/m Setting Up The Paper Delivery Tray A B C D Entering a User Code to Use the Machine A C D Standard Printing I J JJ J K KK K Page Energy Saver Mode Auto Reset Adjusting the Position of Printed Images A B 25 Adjusting the Image Density of Prints Before making a master After making a master Before Making a Master After Making a Master Tint Mode Changing the Printing Speed Stopping a Multi-print Run Reducing and Enlarging Using Preset Ratios Page Auto Magnification Auto Magnification *2 Place these originals in the optional document feeder. *1 The machine automatically rotates the original image by 90 to match the paper direction and selects an appropriate reproduction ratio. See p.85 Image R ota- tion. Original A3LB4LA4LA4KB5LB5KA5L *2 A5K *2 A er. B C ] or { Page 34 Zoom D F Using the [ ] or { Page 36 Directional Magnification (%) D F Adjusting ratios with the [ ] or { Page Directional Magnification (Size) Page Erasing Center and Edge Margins 41 Edge Erase Using Edge Erase mode When not using Edge Erase mode B Page Printing onto Various Kinds of Paper Page Page Selecting Original Modes Letter/Photo Mode Printing C B Page Page Page Economy Mode Auto Cycle All Class Mode B D Page Auto Class Mode B D 55 Selecting classes with the { }, { }, { {| || Page Manual Class Mode with One Original Page Manual Class Mode with two or More Page Page Class Mode Page Combine Originals Combine Originals Page Page Page 69 Auto Combine Mode 1 single-sided original 1 single-sid- ed print of 2 images 1 single-sided originals 1 single- sided print of 4 images Page Skip Feed Printing C Page Programs Page Page Security Mode A C 77 Quality Start Mode Manual Quality Start Auto Quality Start Using Quality Start Manually Page Job Separation B Conserving the Master Double Feed When a Double Feed is Detected A B 83 On Line Printing When a print job has not finished printing while in online mode When printing onto A5K, 51/2" 81/2" K, or non-standard paper sizes When printing onto standard paper sizes or sizes other than A5K, 51/2" 81/2"K Auto On Line Image Rotation Make-up Printing Features Main Features Make-up Modes for Designated Areas Make-up Printing Features Make-up Modes for Outside Designated Areas Background Patterns 90 Command Sheets for Make-Up Printing Command Sheets Making a Command Sheet -Features 91 -Notes 92 Diagonal line method A diagonal line must be drawn through the area that you wish to edit. B Page Command Sheets and Finished Prints Page Make-up Printing B C E G J JJ J K KK K L LL Page Make-up Samples 101 -Sample 2 3. 4. 102 -Sample 3 Original Storage Storing Originals B D 104 E Non-standard size originals Page Page Page 108 Image Overlay Overlay Format On Line overlay Storage overlay Page 110 D Placing originals on the exposure Placing originals in the optional Date Stamp Page Page Stamp B D 114 If you selected [P1,P2] or [-1-,-2-] F H 115 I Placing your originals (K) on the exposure glass Placing your originals (K) in the Stamp B D F Page Memory Combine Combining onto a Singlesided Print Page 120 Placing originals in the optional document feeder (metric version) Placing originals in the optional document feeder (inch version) Placing originals on the exposure glass (metric version) Original A3LB4LA4KL B5KL A5KL Page Page Repeat Page Page Page 2. Optional Functions Optional Document Feeder Originals Placing Originals A B C Page Page Page Color Printing Using the Optional Color Drum Page Page Page Changing the Drum Size Printing Area (At 23 C/73 F, 65% RH) Master Cut Length 3. Combination Chart Combination Chart This combination chart shows which modes can be used together. Page Page Page 4. User Tools Accessing the User Tools B C User Tools Menu For accessing the user tools, see p.141 Accessing the User Tools. 1. System 2. Set Operat'n Mode 3. Initial Setting 4. Mode Setting Page Page Page Page 5. Stamp Page 153 6. Administrator Mode User Codes 7. On Line Mode Page User Tool Menus in Detail Page Page 159 F If you selected A3 to A6 or 11" 17" to 51/2" 81/2" D If you selected p 4-11 No. of Skip Feed E 4-14 No. of Q.start C D Page 5-4 Stamp Position The default position and available settings of each stamp are as fol- lows. {User Tools} and then press the [OK] or { {q qq F G 5-7 Position (Date) 164 C -1- D F G C D F G 5-11 Make/Chg. Pattern D F 6-1 Check Counter C 167 E 6-2 Reset Counters C D If you selected [Single] Page Page Page 5. Troubleshooting If Your Machine Does Not Operate as You Want If a malfunction or a misfeed occurs, the following messages will appear on the panel display. 172 -When a service call message is shown on the panel display If You Cannot Make Prints as You Want If You Cannot Make Prints as You Want Combine Originals Mode Loading Paper x xx x Clearing Misfeeds A x + A Paper Misfeeds in the Paper Feed Section Page Page Page x + C Paper Misfeeds in the Paper Exit Section A x + D Master Misfeeds in the Master Feed Section C A B Page Page Page Page Page Page When the Add Ink Indicator (j jj j) Lights B Page When the Master End Indicator (C CC C) Lights Page When the Master Eject Indicator (k kk k) Lights When Other Indicators Are Lit When Other Indicators Are Lit When Prints Are Not Delivered in a Neat Stack When Printing on Small Size A When the Machine Cannot Detect the Paper Size B Poor Printing Dirty Background A Page Page Black Lines/Stained Prints Faint Prints 6. Remarks Do's and Don'ts Page 199 Where to Put Your Machine Environment Optimum environmental conditions Environments to avoid 200 Power Connection Machine Clearance Main frame Maintaining Your Machine Page 7. Specifications Main Frame Page Page Page Page Page Twin Color Press Roller Printing System TC-II (Option) Specifications Consumables Specifications are subject to change without notice. 211 INDEX A B C D 212 E F H I 213 N O P Q 214 T U W Z