Using the SmartDeviceMonitor for Client Port
29
2
L
LL
LSelect the printer you want to use, and then click [OK].
Only printers that respond to a broadcast from the computer appear. To use
a machine not listed here, click [Specify Address], and then enter the NetBEUI
address. The NetBEUI address can be checked with the configuration page.
For information about printing a configuration page, see p.113 Printing the
configuration page. The NetBEUI address appears in the format of
\\RNPxxxx\xxx on the configuration page. Enter the machine's network
path in t he fo rmat o f %%Computer name\Share name. Use \\ instead of
%% at the beginning.
M
MM
MCheck that the port of the selected printer is displayed in [Port:].
N
NN
NSet a user code, if necessary.
This allows a SmartDeviceMonitor for Admin us er to display and check sta-
tistics about the number of sheets which each user prints. For details, see
SmartDeviceMonitor for Admin Help.
Up to 8 numeric characters can be entered. Neither alphabetic characters nor
symbols are available.
O
OO
OSelect the [Default Printer] check box to configure the printer as default.
P
PP
PClick [Finish].
The printer driver installation starts.
Q
QQ
QClick [Finish] in the installation completion dialog box.
A message about restarting the computer may appear. Restart the computer
to complete installation.
Note
The protocol is set to inactive as default. Enable it using Web Image Mon-
itor or Telnet
To stop installation of the selected software, click [Cancel] before installa-
tion is complete.
Reference
A message appears if there is a newer version of the printer driver already
installed. If there is, you cannot install the printer driver using Auto Run.
If you still want to install the printer driver, use [Add Printer]. See p.57 If a
Message Appears during Installation.
JupiterC2EN-Print-F2_FM.book Page 29 Friday, December 17, 2004 8:17 PM