Using the SmartDeviceMonitor for Client Port
31
2
L
LL
LIn the [Printer URL] box, enter http://printer's address/printer as the print-
er's address.
If the server authentification is issued, to enable SSL (a protocol for encrypted
communication), enter https://printer's address/printer (Internet Explor-
er 5.01, or a higher version must be installed).
(example IP address: 192.168.15.16)
http://192.168.15.16/printer
https://192.168.15.16/printer
You can enter "http://printer's address/ipp" as the printer's address.
M
MM
MEnter a name for identifying the printer in [IPP Port Name]. Use a name dif-
ferent from the one of any existing port.
If a name is not specified here, the address entered in the [Printer URL] box be-
comes the IPP port name.
N
NN
NClick [Detailed Settings] to make necessary settings.
For information about the settings, see SmartDeviceMonitor for Client Help.
O
OO
OCheck that the port of the selected printer is displayed in [Port:].
P
PP
PSet a user code, if necessary.
This allows a SmartDeviceMonitor for Ad min user to display and check the
number of sheets each user prints. For details, see SmartDeviceMonitor for
Admin Help.
Up to 8 numeric characters can be entered. No alphabetic characters or sym-
bols can be entered.
Q
QQ
QSelect the [Default Printer] check box to configure the printer as default.
R
RR
RClick [Finish].
Installation starts.
S
SS
SClick [Finish] in the installation completion dialog box.
A message about restarting the computer may appear. Restart the computer
to complete installation
Note
To stop installation of the selected software, click [Cancel] before installa-
tion is complete.
Reference
A message appears if there is a newer version of the printer driver already
installed. If there is, you cannot install the printer driver using Auto Run.
If you still want to install the printer driver, use[Add Printer]. See p.57 If a
Message Appears during Installation.
JupiterC2EN-Print-F2_FM.book Page 31 Friday, December 17, 2004 8:17 PM