RIDGID BS1400 manual On-Off Switch

18. On-Off Switch

WARNING: Before turning switch “ON”, make sure the blade guards are correctly installed and operating properly.

The On-Off switch has a locking feature. This feature is intended to help prevent unauthorized and possible hazardous use by children and others.

1. To turn band saw “On” insert key into switch. NOTE: Key is made of yellow plastic, located in the loose parts bag.

2.Insert finger under switch lever and Pull end of switch out.

3. To turn band saw “Off” Push lever in.

WARNING: Never leave the band saw unattended until it has come to a complete stop.

4.To lock switch in “Off” position hold switch in with one hand and remove key with other hand.

WARNING: For your own safety, always lock the switch “Off” when band saw is not in use, remove the key and keep it in a safe place. In the event of a power failure (all of your lights go out) turn switch off, remove the key and store it away from the band saw. This will prevent the machine from starting up again when the power comes back on.

17