Maintenance! WARNING:Release all pressure and disconnect power before making any repair.

1. Check compressor for any visible problems, especially check air filter to be sure it is clean.

2.Pull ring on safety valve and allow it to snap back to normal position.

!WARNING:

Safety valve must be replaced if it cannot be actuated or it leaks air after ring is released.

3.Drain moisture from tank daily. Shut compressor off. Depressurize system prior to draining tank. Drain moisture from tank by opening the tank drain

valve underneath the tank.

4. Turn power OFF and clean dust and dirt from motor, tank, air lines and pump cooling fins.

NOTE: The air filter in the filter housing

Tank Drain Valve

on the side of the head must be checked

 

and cleaned periodically, more often if

 

used under very dusty conditions or

 

when a great deal of fog from spraying is

 

allowed to circulate near unit.

 

IMPORTANT: Unit should be located as

 

far from spraying area as hose will allow

 

to prevent over-spray from clogging filter.

 

14