Maintenance
!WARNING:
Release all pressure and dis- connect power before making any repair.
1.Check compressor for any visible problems, especially check air filter to be sure it is clean.
2.Pull ring on safety valve and allow it to snap back to normal position.
!WARNING:
Safety valve must be replaced if it cannot be actuated or it leaks air after ring is released.
3.Drain moisture from tanks daily. Shut compressor off. Depressurize system prior to draining tanks. Drain moisture from tanks by opening the tank drain valves underneath the tanks.
4.Turn power OFF and clean dust and dirt from motor, tank, air lines and pump cooling fins.
NOTE: The air filter in the filter housing on the side of the head must be checked and cleaned periodically, more often if used under very dusty conditions or when a great deal of fog from spraying is allowed to circulate near unit.
IMPORTANT: Unit should be located as far from spraying area as hose will allow to prevent
17
