Spraying Precautions

!WARNING:

Do not spray flamma- ble materials in vicin- ity of open flame or

near ignition sources including the compressor unit.

1.Do not smoke when spraying paint, insecticides, or other flammable sub- stances.

2. Use a face mask/respira- tor when spraying and spray in a well ventilated area to prevent health and fire hazards.

3.Do not direct paint or other sprayed material at the compressor. Locate compressor as far away from the spraying area as possible to minimize overspray accumulation on the com- pressor.

4.When spraying or cleaning with sol- vents or toxic chemicals, follow the instructions provided by the chemical manufacturer.

!DANGER:

Breathable Air Warning

This compressor/pump is not equipped and should not be used “as is” to supply breathing quality air. For any application of air for human consumption, the air compressor/pump will need to be fitted with suitable in-line safety and alarm equipment. This additional equipment is necessary to properly filter and purify the air to meet minimal specifications for Grade D breathing as described in Compressed Gas Association Commodity Specification G 7.1 - 1966, OSHA 29 CFR 1910. 134, and/or Canadian Standards Associations (CSA).

DISCLAIMER OF WARRANTIES

In the event the compressor is used for the purpose of breathing air application and proper in-line safety and alarm equipment is not simultaneously used, existing warranties shall be voided, and Campbell Hausfeld disclaims any liability whatsoever for any loss, personal injury or damage.

5

Page 5
Image 5
RIDGID OL90150 manual Breathable Air Warning, Spraying Precautions