RIDGID R213BNA manual Adjusting the Exhaust

OPERATION

WARNING:

Always wear eye protection. Eye protection does not fit all operators in the same way. Make sure the eye protection chosen has side shields or provides protection from flying debris both from the front and sides.

NO-MAR PAD

See Figure 2.

The no-mar pad attached to the nose of the tool helps prevent marring and denting when working with softer woods.

WARNING:

Disconnect the tool from the air supply before removing or replacing the no-mar pad. Failure to do so could result in serious personal injury.

The pad can be removed by pulling it down and away from the nose. To replace the pad, fit it into place over the nose and push up to reseat.

On-board storage for the pad is located on the magazine of the tool. An extra no-mar pad is provided in the on-board storage area.

ADJUSTING THE EXHAUST

See Figure 3.

The adjustable exhaust on the end cap of the tool allows the operator to direct the exhaust according to operator prefer- ence. To adjust, turn the exhaust cap until the exhaust blows in the desired direction.

NOSE
NO-MAR PAD
STORAGE
NO-MAR	Fig. 2
PAD
	ADJUSTABLE
	EXHAUST

Fig. 3

11