Removing Blade, See Figure | RIDGID R3210-1 specs

REMOVING BLADE

Unplug the saw.

CAUTION:

To prevent damage to the spindle or spindle lock, always allow motor to come to a complete stop before engaging spindle lock.

Depress spindle lock button.

Remove blade screw by turning it clockwise with the hex wrench.

Remove spring washer.

Remove outer flange washer.

Lift lower blade guard.

Remove blade.

Fig. 3

Image 13

Contents

Double Insulation OPERATOR’S Manual Introduction Table of Contents Electrical Safety General Safety RulesPersonal Safety Work Area Service Specific Safety RulesCauses and Operator Prevention of Kickback Additional Safety Rules Symbol Name DESIGNATION/EXPLANATION Symbols Symbol Signal Meaning Double Insulation ElectricalElectrical Connection Extension Cords Features Features Instructions UnpackingPacking List Attaching Blade AssemblySee Figures 2 and 2a See Figure Removing BladeSpindle Lock Button Wrench Blade Screw Applications OperationSAW Blades Blade Guard System See Figures 5, 6, 7, Kickback Switch Trigger Elevation Bracket Depth Adjusting Blade DepthSTARTING/STOPPING the SAW See Figures 11, 12, Operating the SAWLine CUT Bevel Cutting Cross CuttingBevel Stop To Check 0 Bevel Stop To Adjust Bevel Setting To Adjust 0 Bevel StopBevel Adjustment Lever See Figures 16 Pocket Cutting To Bevel CUTNotch Notch Lower Blade Guard Adjusting the Lever Lock Mechanism AdjustmentsLength of CUT Scale General Maintenance Lubrication Brush ReplacementPage DAY Satisfaction Guarantee Policy WarrantyWhat is Covered Under the 3 Year Limited Service Warranty HOW to Obtain Service What is not Covered Double Insulated 4 Worm Drive SAW