UNPACKING
NOTE: Before beginning assembly, check that all parts are included. If you are missing any part, do not assemble this accessory. Call
parts can get lost in packaging material. Do not throw away any packaging until the accessory is completely assembled and attached to your power tool. Check packaging for missing parts before contacting RIDGID.
LOOSE PARTS
The following items are included:
nStand Assembly (1)
nLower Foot (1)
nHex Bolt, 6 mm x 41 mm (2)
nCurved Washers, 6 mm (4)
nLock Nut, 6 mm (2)
nCarriage Bolt, 1/4
nLockwasher, 1/4 in. (4)
nWing Nut, 1/4 in. (4)
nFlat Washer, 1/4 in. (4)
nOperator's Manual (1)
CARRIAGE BOLT
FLAT
WASHER LOCKWASHER
TOOLS NEEDED
STAND ASSEMBLY
LOWER FOOT | HEX HEAD BOLT |
WING
NUT
CURVED WASHER | LOCK NUT |
|
The following tools (not included) are needed for properly assembling your workstand.
| DRILL |
| DRILL BITS (1/4 in., 3/8 in. |
CLAW HAMMER | AND 5/8 in. WOOD BORING BIT) |
|
WRENCHES |
|
10 mm (2) | FLAT SCREWDRIVER |
5
