Wet Nozzle

To pick up liquids off a smooth surface, use the 2-1/2" wet nozzle accessory supplied with your wet/dry vac. To use, simply attach the nozzle to the end of an extension wand.

Connect a second extension wand to the first, and connect the 2-1/2" x 7' hose to the extension wand.

Liquids may be picked up by dragging the nozzle across the surface. The squeegee will dry the surface as you vacuum.

If the rubber becomes worn, it may be flipped over for use on the opposite side or replaced. (Replacement service part #822256). To reverse or replace the squee- gee:

1.Lay the wet nozzle on a flat surface with the round inlet opening facing up and

the two latches close to you as shown.

Latches

Nozzle

Body

Removable

Insert

2.Using both hands, position each thumb on the removable insert, (below the latches) and two fingers of each hand on each latch, lift and disengage the two latches from the tabs on the nozzle body.

3.Gently pull the latches toward yourself to remove the insert.

To reinstall the removable insert correctly, follow these steps:

1.Place the removable insert on a flat sur- face with the pins positioned upward and the latches close to you as shown. Place the rubber squeegee on the insert, with the pins fitting through the matching holes in the squeegee. (Make sure the new working edge is located farthest from you.)

2.Using both hands, lower the nozzle body onto the insert and squeegee with the round opening of the nozzle closest to you. With fingers on the far side and thumbs holding the latches of the removable insert, flip the nozzle over so the latches are on the top and the round inlet opening is facing away from you. Make sure the squeegee stays on the insert pins.

3.Press down with each thumb below the latching tabs until you see and hear the removable insert snap into the nozzle body. Snap the latches over the locking tabs into their original position.

4.Inspect the pins of the insert to make sure they fit through the holes of the squeegee and fit into the matching slots in the nozzle body.

NOTE: If the pins are out position, hold the nozzle assembly with both hands and gently twist in opposite directions. The insert pins should snap into proper position.

Twist

Twist

Backward

Forward

The wet nozzle assembly is ready for wet pickup use.

13

Page 12 Page 14
Page 13
Image 13
RIDGID WD1665 manual Wet Nozzle, Latches Nozzle Body Removable Insert
Page 12 Page 14

WD1665 specifications

The RIDGID WD1665 is a powerful and versatile wet/dry vacuum designed to handle a variety of clean-up tasks, making it an essential tool for both home and professional use. It boasts a robust 16-gallon capacity, allowing users to tackle larger jobs without the need for constant emptying. This vacuum's impressive size is complemented by its powerful 6.5 horsepower motor, which delivers strong suction power, making it effective at picking up both wet and dry debris.

One of the standout features of the WD1665 is its innovative filtration system. It comes equipped with a RIDGID proprietary fine-dust filter that efficiently captures fine particles, ensuring cleaner air is released back into the environment. Moreover, this filter can be easily cleaned and is reusable, which not only saves on replacement costs but also promotes sustainability.

The vacuum is designed with user convenience in mind. It features a lock-on hose that securely attaches to the vacuum, preventing any accidental disconnections during use. The 7-foot locking hose is highly flexible and durable, allowing for extensive reach in various cleaning scenarios. With multiple attachments included, such as a crevice tool and a utility nozzle, users can easily adapt the vacuum to suit different surfaces and cleaning tasks.

For enhanced maneuverability, the RIDGID WD1665 is built with a sturdy cart and large rear wheels, making it easy to transport over various terrains. The vacuum also features a top carry handle, simplifying lifting and relocation. Additionally, the power cord is a generous 20 feet long, providing ample reach without the hassle of frequent unplugging.

Durability is another key characteristic of the RIDGID WD1665. Constructed with high-quality materials, this vacuum is built to withstand regular use across various environments, from job sites to home workshops. Its rugged design ensures it remains reliable even in tough conditions.

In summary, the RIDGID WD1665 is a high-capacity wet/dry vacuum that combines powerful suction, advanced filtration, and user-friendly features, making it a top choice for anyone looking to efficiently manage debris and maintain a clean workspace. Its combination of performance, durability, and practicality makes it an indispensable tool for carpenters, contractors, and homeowners alike.
Top Page Image Contents