Rimage 480i Printer
Printer control panel
The Rimage 480i Printer control panel has three buttons and three LEDs to indicate certain conditions. The table below explains each of these buttons.
LED:
Image | Name | Functionality |
|
|
|
| Cancel | When you press the Cancel button, it provides limited functionality to |
|
| cancel printing. |
| / | The amber LED flashes when there is a hardware issue such as the ink |
| Ink | |
| Cartridge | cartridges are incorrectly installed. |
| Status | The amber LED is on continuously when an ink cartridge is low on ink. To |
|
| check the ink cartridge status, refer to the Checking the ink levels |
|
| procedure on page 15. |
|
|
|
| Tray | The Tray button is used to move the printer tray in and out and to load a |
|
| disc for manual printing or checking alignments. The tray LED lights |
|
| briefly when the button is pushed. A tray movement error causes the tray |
|
| LED to flash. |
|
|
|
| Power | When you press the Power button, the power turns off or on. The green |
|
| Power LED is on when there is power to the printer. The Power LED |
|
| flashes when the printer is printing or in an error state. |
|
|
|
|
|
|
4 | 110761_C |
