Rinnai Q205SN, Q175CP, Q85SN, Q85SP, Q175SN, Q130SN, Q175SP Mode-button, Step-button, Reset-button

6 Mode-button.

Only for Service personel

7Step-button.

After briefly pressing, the water pressure can be retrieved.

After pressing for 5 seconds it switches from the Good-state to technical read out and vice versa (see following pages);

8Reset-button.

When a fault occurs it will be shown by the flashing E (Error) with a number code after which the boiler is shut down. After pressing the reset key you can try to start the boiler again. If the error message keeps occurring contact your installer.

! WARNING DO NOT attempt to make repairs or remove any of the boiler panels. Contact a qualified service agency to make necessary repairs or adjustments.

Operating instructions Rinnai Q-Series

9