
REDUCTION/ENLARGEMENT/ZOOM
Three preset reduction ratios and two enlargement ratios can be selected. The zoom function enables copy ratio selection from 25% to 400% in 1% increments. (When the SPF is being used, the zoom copy ratio range is 50% to 200%.)
1
2
Set the original and check the paper size.
Use the copy ratio selector key and/or ZOOM ( ,
) keys to select the desired copy ratio.
•To verify a zoom setting without changing the zoom ratio,
press and hold down the copy ratio display (%) key. When the key is released, the display will return to the copy quantity display.
•To reset the ratio to 100%, press the copy ratio selector key repeatedly until the 100% indicator lights up.
3 |
| Set the reduction/enlargement ratio. | 4 | ||
|
| To decrease or increase the zoom ratio rapidly, press and hold | |||
|
| down the ZOOM ( | ) or ( | ) key. However the value will |
|
stop at the preset reduction or enlargement ratios. To move beyond these ratios, release the key and then press and hold it down again.
To select a preset copy ratio:
Preset reduction and enlargement ratios are: 50%, 70%, 86%, 141%, and 200%.
To select a zoom ratio:
When a ZOOM ( or
) key is pressed, the ZOOM indicator will light up and the zoom ratio will be displayed in the display.
SELECTING THE TRAY
Press the tray select (
) key.
Each time you press the tray select () key, the location indicated by the paper feed location indicator changes in the following order: paper tray,
30