MISFEED REMOVAL

When the misfeed ( ) indicator blinks or blinks in the display, the unit will stop because of a misfeed. When the SPF misfeeds an original sheet, the unit will stop and the SPF misfeed ( ) indicator will blink, while the misfeed ( ) indicator will remain off. For a misfeed of originals in the SPF, see "D: Misfeed in the SPF (AL- 2041)" (p.87).

1 Open the multi-bypass tray, and then open the side cover.

2 Check the misfeed location. Remove the misfed paper following the instructions for each location in the illustration below. If the misfeed () indicator blinks, proceed to "A: Misfeed in the paper feed area" (p.84).

If the misfed paper is seen from this side, proceed to "C: Misfeed in the transport area" (p.86).

If paper is misfed here, proceed to "B: Misfeed in the fusing area" (p.85).

If paper is misfed here, proceed to

"A: Misfeed in the paper feed area" (p.84).

9

83

Page 83
Image 83
Sharp AL2021, AL2041 manual Misfeed Removal