Sharp AL2041, AL2021 manual When copying in a one-sided to two-sided mode, Using the SPF AL-2041

Making two-sided copies

1

2

3

Place the original(s) on the document glass or in the SPF. (see "ORIGINAL PLACEMENT" (p.26).

Select two-sided copy mode.

When copying in a one-sided to two-sided mode:

Use the Two-sided copy key to select the desired one-sided to two-sided copying mode (Turn on Long Edge or Turn on Short Edge). See the illustrations on page 31.

Select the copy settings. See "SET THE COPY QUANTITY"

(p.28), "EXPOSURE ADJUSTMENT/PHOTO COPYING" (p.28), 4 and "REDUCTION/ENLARGEMENT/ZOOM" (p.30).

Using the document glass

1Press the start () key.

The original is scanned into the unit's memory and the number of the copy quantity blinks in the display.

2Place the original that you wish to copy onto the rear side of the paper, and press the start () key again.

Copying begins.

Using the SPF (AL-2041)

Press the start () key. Copying begins in the selected two-sided copy mode.

32