Sharp AL2041, AL2021 manual Using the SPF AL-2041 1 Place the originals. p.27

Using the SPF (AL-2041)

1 Place the originals. (p.27)

Sort mode is normally the default output mode, and thus the SPF and Sort indicators light up.

•If "Sort auto select" has been set to "2: OFF" in the user programs,

follow the steps below to select sort mode.

• "Sort auto select" can also be used to change the default output mode (p.66).

2 Press the Two-sided copy/Sort key to select the sort mode.

(AL-2041)

4

3 Set the number of copies and other settings, and then press the start () key.

The copies are delivered to the paper output tray.

•To cancel the Sort copy job, press the clear key.

• To cancel Sort mode, press the Sort/Two-sided copy key repeatedly until the Sort indicator is off.

34