Water Piping

General Instructions

A manual water control valve must be placed in the water inlet connection to the Rinnai water heater before it is connected to the water line. Unions may be used on both the hot and cold water lines for future servicing and disconnection of the unit.

The piping (including soldering materials) and components connected to this appliance must be approved for use in potable water systems.

Purge the water line to remove all debris and air. Debris will damage the Rinnai water heater.

Pressure Relief Valve

An approved pressure relief valve is required by the American National Standard (ANSI Z21.10.3) / Canadian Standard (CSA 4.3) for all water heating systems.

The relief valve must comply with the standard for Relief Valves and Automatic Gas Shutoff Devices for Hot Water Supply Systems ANSI Z21.22 and/or the standard Temperature, Pressure, Temperature and Pressure Relief Valves and Vacuum Relief Valves, CAN1-4.4.

The relief valve must be rated up to 150 psi and to at least the maximum BTU/hr of the appliance.

The discharge from the pressure relief valve should be piped to the ground or into a drain system to prevent exposure or possible burn hazards to humans or other plant or animal life. Follow local codes. Water discharged from the relief valve could cause severe burns instantly, scalds, or death.

The pressure relief valve must be manually operated once a year to check for correct operation.

Toxic chemicals such as those used for boiler water treatment are not to be introduced to the potable water used for space heating.

If the appliance will be used as a potable water source, it must not be connected to a system that was previously used with a nonpotable water heating appliance.

Ensure that the water filter on the Rinnai water heater is clean and installed.

The relief valve should be added to the hot water outlet line according to the manufacturer,s instructions. DO NOT place any other type valve or shut off device between the relief valve and the water heater.

Do not plug the relief valve and do not install any reducing fittings or other restrictions in the relief line. The relief line should allow for complete drainage of the valve and the line.

If a relief valve discharges periodically, this may be due to thermal expansion in a closed water supply system. Contact the water supplier or local plumbing inspector on how to correct this situation. Do not plug the relief valve.

Neither Rinnai nor the American National Standard (ANSI Z21.10.3) / Canadian Standard (CSA 4.3) requires a combination temperature and pressure relief valve for this appliance. However local codes may require a combination temperature and pressure relief valve.

Freeze Protection

The freeze protection features include electrical heating elements and intermittent firing of the burner. Freeze protection may be disabled if electricity or gas is not supplied, or if there is an error preventing the water heater from functioning. Loss of freeze protection may result in water damage from a burst heat exchanger or water lines.

The installation of auto drain down solenoid valves is optional. However, Rinnai strongly recommends that these valves be installed to prevent damage from freezing in case the normal freeze protection should become disabled. Any product damage due to freezing will not be covered by the warranty.

In addition, the solenoid valves should be connected electrically to a sub-PC board that attaches to the PC board in the unit. This allows the solenoid valves to operate if the water heater is disabled due to an error code.

The solenoid valves and sub-PC board are available for purchase separately.

VA Series Indoor LS Manual

21

Page 21
Image 21
Rinnai REU-VA3237FFU installation manual Water Piping, Pressure Relief Valve, Freeze Protection

REU-VA3237FFU specifications

The Rinnai REU-VA3237FFU is a high-efficiency gas continuous flow water heater designed to provide instant hot water on demand. It is particularly well-suited for households that require a reliable source of hot water while maximizing energy savings. This unit boasts impressive features that set it apart in the market, catering to both residential and commercial applications.

One of the standout characteristics of the REU-VA3237FFU is its energy-efficient design. With an impressive energy factor of 0.89, this model delivers exceptional performance, maximizing energy use and minimizing waste. The continuous flow technology means that there is virtually no wait time for hot water, making it ideal for busy households with multiple points of use.

The REU-VA3237FFU employs advanced temperature control technology. It features an intelligent digital controller that allows users to easily set their desired water temperature. This ensures consistent delivery of hot water at the desired temperature, enhancing comfort while also promoting safety by reducing the risk of scalding. The model also incorporates a safety lock function that can prevent accidental changes to the temperature setting.

In terms of durability and design, the Rinnai REU-VA3237FFU showcases high-quality build materials that contribute to its longevity. The stainless steel heat exchanger is resistant to corrosion, ensuring a long life expectancy and reliable performance over time. Additionally, the compact design makes it easy to install in tight spaces, whether indoors or outdoors, adapting to various installation environments.

Moreover, the Rinnai REU-VA3237FFU features a low NOx emission system, aligning with environmental standards and regulations. This eco-friendly technology makes it an excellent choice for environmentally conscious consumers looking to reduce their carbon footprint while enjoying the benefits of modern hot water systems.

The Rinnai REU-VA3237FFU is also equipped with a self-diagnostic system, which allows for easier maintenance and troubleshooting. This feature increases the unit's reliability by monitoring its performance and alerting users to any potential issues before they develop into significant problems.

In summary, the Rinnai REU-VA3237FFU is a standout continuous flow water heater that combines energy efficiency, durability, and advanced technology. With its smart temperature control, compact design, and environmentally friendly features, it is an outstanding choice for anyone seeking a dependable and efficient hot water solution.