Roadmaster RMCD100M, VRCD100M manual Radio Operation, CD Operation, Auxiliary Input, RCA Output

Radio Operation

1. Choose A Radio Band

Press the BAND Button anytime to access the radio function. The unit has one FM Band and one AM Band. Each press of the Band Button will change the radio from one Band to the other.

2. Radio Tuning

In Radio Mode, turn the Radio Tuning Knob to adjust the radio frequency. Press and hold the button, and the radio will go through the stations until you release the button.

3.Mono / Stereo

Press the MO / INT button to change the radio’s output from Mono to Stereo. This function only works in Radio Mode.

4. Intro

Press the MO / INT Button to play the first 10 seconds of each track. Press this but- ton again to when you find the track you wish to play.

5. Repeat

Press the LOC / RPT Button to repeat the same track continuously. “RPT” will appear on the display. Press this button again to stop repeating.

6. Random

Press and hold the LUD / RDM Button to play all the tracks in random order. “RDM” will appear on the display. Press and hold this button again to stop random play.

CD Operation

1. Insert/Eject CD

Insert a disc into CD slot with label side up. The disc will be automatically loaded into the unit, even when it is off or at radio mode. The word “LOAD” will blink on the display and the CD will play automatically. Press the EJECT Button to eject the disc from the slot. When the disc is ejected, the unit will automatically switch to radio mode.

2. Selecting Tracks

On the Head Unit, press the >> Button to advance CD to the next track. Track numbers will be shown on the display. Press the << Button to go to a previous track. Track numbers will be shown on the display.

3. Play/ Pause CD

Press the   Button to pause the CD. Press this button again to resume playback.

Auxiliary Input

The Auxiliary Input Jack is on the right side of the unit. Insert a 3.5mm stereo cable into the Auxiliary Input Jack. Route the other end of the stereo cable to the head- phone jack of any portable audio device such as a MP3 Player or DVD Player. Press the AUX button to choose the Auxilary Input Jack. Connect any portable audio device such as a DVD player or VCD player to the AUX IN cable. Use the volume con- trol to adjust volume.

RCA Output

The RCA Line Out is on the back of the unit. (Refer to Wiring Diagram) This output is for connecting amplifier, equalizer, or other audio componement that requires

apre-amp out connection. (Red = Right, White = Left)

Follow the manufacturers instructions for the audio component that you are con- necting.

10