Roberts Gorden CRV-Series service manual One-Footdecorative Grille Installation

ROBERTS GORDON ® CRV-SE RI ES SUBM ITT AL SHE ET

Reflector Side Extension Installation for Decorative Grilles

NOTE: If the Decorative Grille system is to be installed in an area
with considerable air movement, it is recommended that one
#8 x 3/8 (3.9 x 9.5mm) sheet metal screw be installed per reflector
extension to prevent it from blowing over.	Cut Relief Notches for Tube6" (15 cm) Minimum
	and Reflector Hangers

Allow 6" (15 cm) minimum clearance between Burner Box and overhead

obstructions for service.

Insert Screw

here(See NOTE)

A

Description	Part Number
Reflector Side Extension	01370412

Reflector Side Extension

Distance "A"		Extension
Minimum	Maximum	Part No.	Width
2" (4 cm)	6" (15 cm)	01370408	8" (20 cm)
6" (15 cm)	10" (26 cm)	01370412	12" (30 cm)
10" (26 cm)	14" (37 cm)	01370416	16" (40 cm)

ONE-FOOT DECORATIVE GRILLE INSTALLATION

One-Foot Decorative Grille Bracket

In order to maintain reflector shape, do

#8 Sheet Metal Screws not fasten brackets together. Do not fasten bracket to adjoining reflectors. Maintain same slipjoint position as reflectors.

	Decorative Grille Bracket
Description		Part Number
Bracket		01363003

Cut relief notches for supports and hangers.

2" Minimum Bracket Overlap

© 2004 Roberts-GordonBEFORE INSTALLATIO N AND OPERATI ON OF HEATIN G EQUI PMENT, READ AND UNDERSTAND THE I NSTALLATION, O PERATION AND SERVICE MANUAL .

APPLI CATIONS, ENGIN EERING AND DETAI LED GUIDANCE ON SYSTEMS DESI GN, I NSTALLATION AND PRODUCT PERFORMANCE I S AVAILABLE UPO N REQUEST. ROBERTS GO RDON® PRODUCTS ARE TO BE INSTALLED ONLY I N ACCOR DANCE WITH LOCAL LAW S, CODES AND REGULATIONS, AND ONLY BY A CONTRACTO R QUALI FIED IN THE INSTALLATION AND SERVICE OF GAS-F IRED HEATING EQUIPMEN T.