SECTION 8: SERVICING INSTRUCTIONS

8.3 Maintenance Checklist

Installation, Service and Annual Inspection of the pump must be done by a contractor qualified in the installation and service of gas-fired heat- ing equipment.

Turn off the system and ensure power and gas supply is shut off before servicing equipment.

Read this manual carefully before installation, operation, or service of this equipment.

System Tubing and Vent Venting must be intact. Using a flashlight, look for obstructions, cracks on the

Pipepipe, gaps in the sealed areas or corrosion.

The area must be free of dirt and dust or blockage.

Remove any carbon deposits or scale using a wire brush.

Replace pipe if there are any holes due to corrosion. Seal any gaps in venting to prevent condensate leakage.

Pump Scroll, Impeller and Motor

Compressed air or a vacuum cleaner may be used to clean dust and dirt.

Check for corrosion, if any parts have corroded through, replace as neces- sary.

Ensure all hex nuts are tight for proper seal.

Suspension Points

Make sure the pump is hanging securely.

 

Look for signs of wear on the mounting angles, wall mounting points or ceiling

 

mounting points.

 

 

Pump Boot

Inspect pump boot at pump inlet and outlet for cracking or deterioration.

 

Replace if cracks are found.

 

Ensure band clamps are tight at all connection points.

Condensate Trap, Drain Cap

Check connection of tee to drain cap and between tee and condensate trap. Seal connections between tee and drain cap to prevent condensate leakage.

Screw condensate trap tightly into drain cap or pump inlet assembly to pre- vent leakage.

Condensate trap should be filled with water.

Pressure Switch

Ensure that wiring is intact.

 

 

17

Page 22 Page 24
Page 23
Image 23
Roberts Gorden EP-203 Pump Scroll, Impeller and Motor, Suspension Points, Pump Boot, Condensate Trap, Drain Cap
Page 22 Page 24

EP-203, EP-200 Series specifications

The Roberts Gordon EP-200 Series, especially the EP-203 model, is a revolutionary line of infrared heating systems designed for industrial and commercial applications. These heaters are renowned for their efficiency, performance, and innovative features, making them a preferred choice for customers seeking reliable heating solutions.

One of the main features of the EP-200 Series is its advanced infrared heating technology. Unlike traditional heating systems that rely on air convection, infrared heaters warm objects and surfaces directly. This results in faster heating times and a more consistent temperature within the space. The EP-203 model features a unique design that allows for flexibility in installation, whether it is mounted on ceilings, walls, or even used in portable applications.

The EP-203 is engineered for optimal performance, utilizing a high-quality ceramic burner that delivers uniform heat distribution. This technology not only enhances comfort but also reduces energy consumption, making the system exceptionally cost-effective over time. The EP-200 Series is also designed with longevity in mind, utilizing durable materials that withstand the rigors of industrial environments.

Another standout characteristic of the Roberts Gordon EP-200 Series is its straightforward controls. The EP-203 can be easily integrated with advanced control systems, including thermostats and smart building technologies, allowing users to manage heating efficiently and adapt to varying environmental conditions.

Safety is a priority in the design of the EP-200 Series. The EP-203 is equipped with several safety features, including automatic shut-off mechanisms, flame safeguards, and overheat protection. These features ensure not only the safety of the equipment but also the wellbeing of personnel in the vicinity.

Additionally, the EP-200 Series is recognized for its environmental consideration. These heaters operate on clean-burning fuels, minimizing greenhouse gas emissions while providing powerful heating capabilities. This aligns with modern sustainability goals, making it an ideal choice for businesses looking to reduce their carbon footprint.

In summary, the Roberts Gordon EP-200 Series and its EP-203 model represent cutting-edge technology in infrared heating solutions. With features focusing on efficiency, safety, and environmental sustainability, they are well-suited for a variety of applications, ensuring comfort and cost savings for users in the industrial and commercial sectors. These attributes, combined with the brand's reputation for quality and performance, solidify its position in the heating market.
Top Page Image Contents